5 Mistakes to Avoid When Installing a Sprinkler System

Sprinkler irrigation is one of the most remarkable discoveries in the agricultural field. The system has ensured uniform water supply to crops irrespective of the season and is exceptionally beneficial in arid or semi-arid regions. However, there are several factors to keep in mind and a few significant mistakes to avoid while installing a sprinkler system.

Here is a list of things to avoid and ensure while installing an efficient sprinkler system.

Debunk the Myths

While integrating sprinkler irrigation systems, it is a common mistake to consider various crops the same. However, it is crucial to note the significant differences between the crops and deploy a sprinkler accordingly.

For instance, some sprinkler systems are only ideal for irrigation in tunnels. In contrast, others will work for cooling and humidifying greenhouses. Without considering these factors, it will be challenging to make an informed decision and enhance the crop’s quality.

Proper Sprinkler Arrangements

We often see that the sprinkler heads operate in the same zone simultaneously. However, this problem should be avoided when one takes refuge in the process of sprinkler irrigation. The precipitation rates among different sprinkler heads such as bubbles, dip, sprays, and rotors.

When various types of sprinklers are allocated in the same zone, there would be spots left out which would remain dry, resulting in a considerable time consumption making the process long.

Facilitate Automation

While implementing sprinkler irrigation solutions, it is critical to ensure that effectively deliver water to the crops. Today, you can automate this process through precision farming solutions. These solutions utilize an innovative approach, including area mapping, water pressure, sprinkler type, etc.

After establishing these things, you can automate the sprinkler irrigation process and even remotely manage it. You will not have to worry about overwatering or underwatering and can minimize manual intervention significantly.

Beware of Gas Lines:

While determining the location of sprinkler irrigation, one must check before digging the ground. The electric cables and the gas pipes are generally installed by drilling the ground and connecting. This might be very risky since the cable lines might get hit during the drilling process for sprinkler irrigation, resulting in the workers’ electrocution.

Risks are also there where the sprinkler system gets electrically charged. If one hits the gas pipes, the chance of a fire breaking out in the area is a standard risk. So, it is always beneficial if one checks the location of the gas pipes and the electric cables before digging.

Furthermore, it is crucial that the workers undertake considerable safety measures wear safety jackets and masks to avoid severe harm during the drilling process.

Check the Depth of the Pipes:

You must also check the depth of the pipe trenches. It is a significant mistake where the pipe trenches are too deep or shallow. The general depth of a pipe allocated for sprinkler irrigation in the ground should be between 7 to 10 inches. Less than 7 inches, the pipe would take the weight of anything that might cause the pipes to crack.

Since these pipes remain underground, it is impossible to check whether it is in perfect condition frequently. On the other hand, if the depth increases more than 10 inches, it would become difficult to detect whether the pipe is in good condition after a while. Thus, getting pipes with the prescribed depth is one of the most crucial aspects of having successful sprinkler irrigation.

Conclusion:

Though the sprinkler system is highly beneficial, these points mentioned above help you ensure greater efficiency. However, you must also avoid overusing this system, especially when you do not need it. Thus, make sure you use this system diligently and avoid wasting natural resources. Remember, you must use them only when there are no rains, and your crops might die. Otherwise, it is best to depend on the natural weather and grow your crops.