Fix: WiFi Issue After D Link Dap 1650 AC1200 Extender Setup

So, have you set up your D link dap 1650 WiFi range extender AC1200 in a proper manner – but what’s that? You connected your smart devices to the extender’s new extended WiFi network but got no internet? Need not to worry! We have come up with this post. Through this piece of writing – you can easily get rid of the no internet issue with your D Link Dap 1650 WiFi range extender AC1200. Let’s take the plunge.

No Internet After D Link Extender Setup

Fix 1: The Extender’s SSID

The moment you are done with d link wifi extender setup, you will get a new, extended SSID. Maybe you are connecting your devices to the existing network instead of the new one. As a result, you will get no internet even after performing d-link WiFi extender setup. So, be sure to connect your devices to the new extender’s SSID only. Doing so will somehow fix the no internet connection issue for you.

Fix 2: The Placement 

Where is your D link dap 1650 WiFi range extender AC1200 located? On the off chance if it is placed near to windows, in a corner, under a table, inside an almirah, or back of any device, then you will get no internet even after performing d-link WiFi extender setup.

Apart from this, if your D link dap 1650 WiFi range extender AC1200 is placed away from the reach of your existing router and near to the range of neighboring WiFi, then you will also experience no internet connectivity issue. Therefore, always remember to place your D link dap 1650 WiFi range extender AC1200 at the center-most area in your home. After relocating your extender, try accessing d-link extender login page to see if the internet issue is now fixed.

Fix 3: The Configuration

Perhaps you have not performed the d-link WiFi extender setup process properly due to which it is unable to provide you an extended and uninterrupted internet range on your connected devices. So, be sure to perform the d-link WiFi extender setup process in the correct manner.

In order to perform the d-link WiFi extender setup, connect the AC1200 device to your router using an Ethernet cable. After that, open a web browser on your PC and go to its web page setup page using 192.168.0.50 IP or http://dlinkap.local web address. Use the extender’s default username and passphrase into the given fields. Click Log In once you’re done. Are you logged in? If so, then follow the on-screen instructions and configure your D link dap 1650 WiFi range extender AC1200 in no time.

Note: For Windows XP users use http://dlinkap.

Fix 4: The Reset Process

If none of the fixes mentioned above helped you out to fix no internet connection issue for you, then the only option you are left with is to reset your D link dap 1650 WiFi range extender AC1200 back to the factory default settings? But, prior to resetting your D link dap 1650 WiFi range extender AC1200, we suggest you take the back up of the device settings. The reset process will delete all customized settings of your D link dap 1650 WiFi range extender AC1200. Wondering how to take the back up of the extender’s settings? Shoot your queries into the comments section.

Moving on, let’s guide you with the D link dap 1650 WiFi range extender AC1200 reset process:

  • Turn on your D link dap 1650 WiFi range extender AC1200 upside down.
  • Locate the reset hole on your range extender. You can easily find the reset hole on the bottom panel of your device.
  • Press and hold the reset button for at least 1-2 minutes.
  • Your D link dap 1650 WiFi range extender AC1200 will begin to reboot and will perform a full factory reset process.

Does this article helped you out to perform d-link WiFi extender setup process? Please share your feedback with us.

Read more : D Link firmware update

dlinkap.local

dlinkap.local setup wizard

Leave a Reply

Your email address will not be published. Required fields are marked *