How to Reset Linksys Smart Wifi Router?
Whether it is due to Linksys router hardware issues, or the software having glitches, or maybe you are not getting the required bandwidth and internet speeds, resetting the router is a one-stop solution. This will help restore the device settings to the factory default and overcome issues related to every aspect of your device. Though making a factory reset is not always suggested, if you have tried and tested every other troubleshooting step, and are still facing issues with the router device, there’s no other way you can go. If you are looking for information on how to reset Linksys router and resolve issues on the go, this blog will walk you through the complete steps.
What does Linksys Router RESET actually do?
The factory reset operation is different from what you might presume as a system reboot. Though a device reboot will do most troubleshooting, a complete system reset will wipe away all the configuration and settings you might have made. These include your network and device passwords, SSID details, MAC filters, access controls, and more. Everything will get reset to the point it was when the router came out of the factory.
Resetting the Linksys router is a good idea if you decide to sell it or dispose of it. This way whoever gets access to the router, can start from point zero and won’t be able to access any of your personal information.
Linksys router RESET: Push Button method
The push button method for Linksys router reset will involve using the physical reset button located on your router. Now, this may either be concealed inside a small hole or protruded outside. If the former is the case, you might need a thin object like a pin or paperclip. Once you get hold of things, turn on your router device.
- Press and hold the RESET button for about 10 seconds.
- You’ll notice the LEDs on the front panel begin to flash altogether. This is an indication that you should release the RESET button.
Note: Some routers may require you to press the RESET button for more than 10 seconds. You may try holding the RESET button for longer if the LEDs don’t flash.
- The router will now reboot itself. Allow the process to complete and then you can proceed with the configuration process again.
The 30-30-30 method
In case the push button method described above doesn’t help reset Linksys Router, you can try the 30-30-30 method. Here are some steps you can follow:
- Hold the RESET button for about 30 seconds.
- Unplug the router and leave it as such for 30 seconds. After that, plug it back in.
- Hold the RESET button for another 30 seconds and let the device reboot after the reset.
Your Linksys router is now reset to factory default. You can now proceed with the fresh configuration using the general setup steps. If you need help with configuring the default router settings, you can refer to the information on our website.